Hasbro Marvel Legends Haslab Sentinel Figure Tri-Sentinel Headsculpt Tier 4 Unlocked

Hasbro Marvel Legends Haslab Sentinel Figure Tri-Sentinel Headsculpt Tier 4 Unlocked


Jay Cochran - August 22, 2020
This past Tuesday, with less than a week to go before the campaign for the Haslab Marvel Legends Sentinel from Hasbro ended, they announced one last addition with an alternate Tri-Sentienl headsculpt. This would be included with the figure if the project reached 16k backers.




With just over 2 days left have now surpassed that 16k backers benchmark, which means the Tri-Sentinel head is now a guaranteed accessory to be included with the figure. As I type this the project has 16,047 backers.

So just to recap, here is a list of everything that will now be included with the Sentinel for those who choose to plop down the $349.99 needed to buy one.

- 26.3-inch (669 mm) Sentinel figure
- LEDs in the head and chest (2x AAA batteries required, not included)
- Two 18-inch Sentinel “tentacle” accessories
- Marvel Legends 6-inch Bastion figure with 6-Inch alternate Sentinel Prime head
- Marvel Insider Points Redemption code (70,000 points per purchase, limit 2 code redemption per account) & X-Men #14 (1963) digital comic
- Tier 1 UNLOCKED: Marvel Legends Master Mold alternate head accessory
- Tier 2 UNLOCKED: Battle Damaged Head & Hand accessory
- Tier 3 UNLOCKED: Marvel Legends 6-inch Female Prime Sentinel Figure
- Tier 4 UNLOCKED: Tri-Sentinel Head

The project will end at 11:59pm ET on August 24th, 2020. If you haven't backed it already and want to do so, CLICK HERE.
Image 1 of 22
1 of 22
Image 2 of 22
2 of 22
Image 3 of 22
3 of 22
Image 4 of 22
4 of 22
Image 5 of 22
5 of 22
Image 6 of 22
6 of 22
Image 7 of 22
7 of 22
Image 8 of 22
8 of 22
Image 9 of 22
9 of 22
Image 10 of 22
10 of 22
Image 11 of 22
11 of 22
Image 12 of 22
12 of 22
Image 13 of 22
13 of 22
Image 14 of 22
14 of 22
Image 15 of 22
15 of 22
Image 16 of 22
16 of 22
Image 17 of 22
17 of 22
Image 18 of 22
18 of 22
Image 19 of 22
19 of 22
Image 20 of 22
20 of 22
Image 21 of 22
21 of 22
Image 22 of 22
22 of 22






Comments...

Last 10 comments - ( Read All Posts )
Emnems80 - 2021-10-02 @ 2:40 pm
On 9/15/2021 at 12:17 PM, GrtWhiteCustoms said:

I can't wait to get mine....Ill only be displaying him as Master mold and will hold out hope we get a rerelease of the smaller SENTINEL at some point or a new BYRNE era SENTINEL.

I'd probably do the same if Hasbro went that route. Would love an army of smaller sentinels around Master Mold in my display. If I had the money I would have bought more of the Haslab Sentinel. I also would have backed the Haslab Galactus and bought two. One to be Galactus, the second to see if the Master Mold head would fit on the Galactus body and see if that worked for my dream Sentinel display.

Jormungand - 2021-09-16 @ 2:08 am

Spectacular set of action pics! Makes me almost wish I had backed the sentinel last year... almost. I'll save my money for all the figures coming out yet this year and next.

Atlantis - 2021-09-15 @ 7:32 pm

Hit him in the knee! He's weak there already! Just like Justin Hammer, Trask can't manufacture quality for sh1v!! LOL

GrtWhiteCustoms - 2021-09-15 @ 7:17 pm

I can't wait to get mine....Ill only be displaying him as Master mold and will hold out hope we get a rerelease of the smaller SENTINEL at some point or a new BYRNE era SENTINEL.

JayC - 2021-09-15 @ 5:49 pm

Sentinel-01.jpg

Sentinel-02.jpg

Sentinel-03.jpg

Sentinel-04.jpg

Sentinel-05.jpg

Sentinel-06.jpg

Sentinel-07.jpg

Sentinel-08.jpg

Sentinel-09.jpg

Sentinel-10.jpg

Sentinel-11.jpg

Sentinel-12.jpg

Sentinel-13.jpg

Sentinel-14.jpg

Sentinel-15.jpg

Sentinel-16.jpg

Sentinel-17.jpg

Sentinel-18.jpg

Sentinel-19.jpg

Sentinel-20.jpg

Sentinel-21.jpg

Sentinel-22.jpg

Sentinel-23.jpg

Sentinel-24.jpg

Sentinel-25.jpg

Sentinel-26.jpg

Sentinel-27.jpg

Sentinel-28.jpg

Sentinel-29.jpg

Sentinel-30.jpg

Sentinel-31.jpg

Sentinel-32.jpg

Sentinel-33.jpg

Sentinel-34.jpg

Sentinel-35.jpg

Sentinel-36.jpg

Sentinel-37.jpg

Sentinel-38.jpg

Sentinel-39.jpg

Sentinel-40.jpg

Sentinel-41.jpg

Sentinel-42.jpg

Sentinel-43.jpg

Sentinel-44.jpg

Sentinel-45.jpg

Sentinel-46.jpg

Sentinel-47.jpg

Sentinel-48.jpg

Sentinel-49.jpg

Sentinel-50.jpg

Sentinel-51.jpg

Sentinel-52.jpg

Sentinel-53.jpg

Sentinel-54.jpg

Sentinel-55.jpg

Sentinel-56.jpg

Sentinel-57.jpg

Sentinel-58.jpg

Sentinel-59.jpg

Sentinel-60.jpg

Sentinel-61.jpg

Sentinel-62.jpg

Sentinel-63.jpg

Sentinel-64.jpg

Sentinel-65.jpg

Sentinel-66.jpg

Sentinel-67.jpg

Sentinel-68.jpg

Sentinel-69.jpg

Sentinel-70.jpg

Sentinel-71.jpg

Sentinel-72.jpg

Sentinel-73.jpg

Sentinel-74.jpg

Sentinel-75.jpg

Sentinel-76.jpg

Sentinel-77.jpg

Sentinel-78.jpg

Sentinel-79.jpg

Sentinel-80.jpg

Sentinel-81.jpg

LordVenger - 2021-09-15 @ 7:20 am
On 9/14/2021 at 7:34 PM, Virtualzach said:

You're not following the same logic here. What I'm saying is, and this applies to most products, if you're going to sit there and screw around with it until it starts to loosen up, don't be surprised. How many people here do you think actually *play* with these figures versus how many pose them once or twice and then they stay on a shelf for months or years? No one is saying you shouldn't be able to pose them. But if someone is sitting there on cam for 20 mins flexing the wrist back and forth, over and over again and then it finally looses some of it's rigidity--congratulations, you just broke your figure. It didn't "come loose", you made it that way.

I just want to make sure that distinction is clear. A lot of people will say "My figure was loose right out of the box" but neglect to mention that they spent two days creating dioramas with it and that their kid happened to play with it for a few hours. There is no Marvel Legend that, upon repeated flexing and posing, will continue to stay rigid and perfectly posable forever.

While obviously not including any haslab, marvel legends in general should be able to hold up to play because they are aimed at kids for play. Just ask them? I have and they continue to say kids make up 80% of their products purchased . That includes adults buying for kids. So it doesnt make sense that they shouldnt be designed with play in mind.

MODADDYDODOK - 2021-09-15 @ 6:34 am
On 9/14/2021 at 5:22 PM, Atlantis said:

During the Fan First Monday video, a few people noticed Dwight's Sentinel laying back on the couch. Probably because the knees are too weak to support it.

LOL just kidding....I think....

Haha hey, maybe so! Mine actually isnt any worse than Robos. but still.

Virtualzach - 2021-09-15 @ 12:34 am
On 9/14/2021 at 4:16 PM, Gigantor said:

If you buy action figures just to "unbox or not, display and leave alone", you might as well just but statues.

You're not following the same logic here. What I'm saying is, and this applies to most products, if you're going to sit there and screw around with it until it starts to loosen up, don't be surprised. How many people here do you think actually *play* with these figures versus how many pose them once or twice and then they stay on a shelf for months or years? No one is saying you shouldn't be able to pose them. But if someone is sitting there on cam for 20 mins flexing the wrist back and forth, over and over again and then it finally looses some of it's rigidity--congratulations, you just broke your figure. It didn't "come loose", you made it that way.

I just want to make sure that distinction is clear. A lot of people will say "My figure was loose right out of the box" but neglect to mention that they spent two days creating dioramas with it and that their kid happened to play with it for a few hours. There is no Marvel Legend that, upon repeated flexing and posing, will continue to stay rigid and perfectly posable forever.

Gigantor - 2021-09-14 @ 11:16 pm
On 9/14/2021 at 5:39 PM, Virtualzach said:

If they really are loose right out of the box, that's obviously a problem. But I know some people will open ML figures up, pose them for hours and effectively loosen them up themselves...then complain about it. Heck, just reading some of the Amazon reviews is enough to make me smh; these aren't toys meant to be smashed around and beaten up. Even on the Sentinel review videos, I can't help but to cringe a bit when watching owners display joint articulation, literally working the joints a dozen times and then posing them 20 different ways. You buy it, unbox it (or not), display it and leave it alone. Any figure or product in general with a moving joint is going to wear down. Especially when it's three feet tall, made of plastic, and supporting a decent amount of weight.

If you buy action figures just to "unbox or not, display and leave alone", you might as well just but statues.

Virtualzach - 2021-09-14 @ 10:39 pm

If they really are loose right out of the box, that's obviously a problem. But I know some people will open ML figures up, pose them for hours and effectively loosen them up themselves...then complain about it. Heck, just reading some of the Amazon reviews is enough to make me smh; these aren't toys meant to be smashed around and beaten up. Even on the Sentinel review videos, I can't help but to cringe a bit when watching owners display joint articulation, literally working the joints a dozen times and then posing them 20 different ways. You buy it, unbox it (or not), display it and leave it alone. Any figure or product in general with a moving joint is going to wear down. Especially when it's three feet tall, made of plastic, and supporting a decent amount of weight.

Post Your Comment Now! (membership required)


MARVEL SHOPPING ONLINE


advertise here

Search Online Stores for Hasbro Marvel Legends



The affiliate links on this site may generate revenue for it when a purchase is made
Toys Shopping Oniine




More Action Figures News

Advertise on Marvelous News




This site uses cookies for site configuration, advertising, and analysis. By using this site you accept our policies - Read Full Site Policy OK
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Forums Communities: Toy Fans - Marvel Fans - Transformers Fans

@ToyNewsI Socials: Facebook - Twitter - Instagram

@MarvelousNews Socials: Facebook - Twitter - Instagram

@Tformers Socials: Facebook - Twitter - Instagram

@JediInsider Socials: Facebook - Twitter - Instagram

Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE