Marvel Legends 6" X-Force Cannonball Figure Video Review And Images

Marvel Legends 6" X-Force Cannonball Figure Video Review And Images


Jay Cochran - July 12, 2019
MCUcollector24 takes a look at the new Marvel Legends 6" X-Force Cannonball figure from Hasbro. You can purchase this figure at Megalopolis.Toys.



Check out images for this figure below in our GALLERY and be sure to share your own thoughts about it in the COMMENTS SECTION.
Image 1 of 10
1 of 10
Image 2 of 10
2 of 10
Image 3 of 10
3 of 10
Image 4 of 10
4 of 10
Image 5 of 10
5 of 10
Image 6 of 10
6 of 10
Image 7 of 10
7 of 10
Image 8 of 10
8 of 10
Image 9 of 10
9 of 10
Image 10 of 10
10 of 10

Comments...

Last 10 comments - ( Read All Posts )
JeffCoJeffCo - 2019-07-23 @ 2:34 am

Ah the celebrated member of the League of Losers. Can't wait to pick up this one off the shelves!

newcollector24680 - 2019-07-22 @ 10:37 pm

I'm not familiar with this X-Force team so I don't plan on getting this figure or Boom-Boom anytime soon. Ido know the X-Force team with Wolverine and X-23 and I really hope that Hasbro releases War Path, Archangel, andpsylocke in there black and gray outfits.

Starlord67 - 2019-07-14 @ 2:39 am

Well,when I was making my Reese custom, I tried to take apart a killmonger figure. If it's any indication of how easy it is..get ready to put a whoopin on it!! It took me beating it with a hammer to get it cracked open.

EvilHayato - 2019-07-14 @ 1:28 am
On 7/12/2019 at 6:36 PM, bashpics99 said:

Spider-ham comes to mind. Everyone complained about his lack of artic but haven't seen him on pegs in a long time and he's going foraround$30 and up loose on ebay. WIth the BAF piece the price is $40 plus.

Id imagine the spiderman animated movie helped introduce and popularize him to those that were unbeknownst about him before the movie. So now hes a high demand character despite having little to no articulation. Also hes one of those oddball choices for a character selection in a wave. ( altho I personally really like him.) Also the giant venom piece and the porkgrind head kind of helped up his worth as well.

6 hours ago, bashpics99 said:

Theres a Wendigo figure in the Fin Fang Foom wave. He's pretty expensive though - listed for over $50 on ebay.

There's also the old "White Sasquatch" from Toybiz that could be used as a stand-in, I suppose.

That "white sasquatch" was considered Snowbird transformed. And yeah lack of tail doesnt work for a wendigo.

Reno - 2019-07-14 @ 12:23 am

Seems like half a figure to me. I'll stick with my original Hasbro version. Nice idea, but they should have done legs that could be swapped out at as well. I'm hoping that this is a precursor to more New Mutants figures though. I've wanted Sunspot, Wolfsbane, Moonstar, Karma, etc. for so long.... They showed a Moonstar figure a few years ago at SDCC and then didn't end up releasing it. That pissed me off.

abnuggler - 2019-07-13 @ 9:18 pm
15 hours ago, enzosaurusrex said:

Nice! I wonder if the Paladin legs will fit this too!

They might, its just a matter of wether the hip hole and the peg fit cannonball's Upper torso, I took apart an elektro figure from amazing spiderman 2 (I believe he uses the same legs but I cant remember how they fit the bucky cap-ish torso)

abnuggler - 2019-07-13 @ 9:14 pm
3 hours ago, Twizzlerp said:

Stupid question but how do you get the legs off a figure to do this? I bought a hydro man specifically to use his legs/waist for Sam but cant get the bloody things off!

You'll have to crack the abs apart or the waist piece either will separate the torso from the legs, there are a bunch of tutorials online on how to crack ML bodies apart, the easiest way is to crack the hips apart, remove the peg that unites the legs with the upper body and just put the hipsbacktogether with Cannonball's torso (but youll have to fill in the holes of the cracked hips and repaint so its more work), for a moreminimal damage to the legs I suggest you crack the abs of Hydroman to separate the legs from the torso, then crack either the abs from cannonball (from the lower part that you wont see when the figure is put back together)or the hips from hyrdoman (these from the upper part that will be covered once you reassemble the figure), then you just put everything back together superglue the piece you cracked open and no repairs needed, now you just need to repaint the legs to match cannonball.I personaly think the smooth bucky cap mold legs repainted would work better (Shockers would be great cause they have the different kneepads and the brown boots, you'd just have to repaint the hips and legs), but if you want to have legs that have sculpted pants on them a good fit would be either Cap's legs from infinity war or Spiderman Noir's (youd just have to make sure the peg and peg holes are compatible between the legs and the torso, sometimes these change from mold to mold) Im sure in costumizing forums many people woud know.

michiganjfrog - 2019-07-13 @ 8:45 pm

I kind of want to get this for the jacket, might make a good star lord jacket after a repaint

I guess it depends on what the secondary market price for these turns out to be

bashpics99 - 2019-07-13 @ 6:50 pm
8 minutes ago, MonsterChris said:

No tail!

Good point, i suppose that is a bit of a deal-breaker!!

And i agree, the new figure is probably much better than Fin Fang Foom version except the head, debatably. I do think that whole wave is pretty good but i do think Guardian, Boom-Boom, and Cannonball could be potential pegwarmers so I'll probably hold off on getting them for awhile... therefore Wendigo could take some time for me to finish. He can join sp//dr, Caliban, and Prof Hulk in my "to be finished" BAF pile.

MonsterChris - 2019-07-13 @ 6:37 pm
1 hour ago, Starlord67 said:

Didn't HASBRO already do this version ib the Hulk line?

Yeah, but I never got him and now I like the body for the new one better. Since I'm buying the whole wave anyway, I'd love a John Byrne head released to keep me from having to go after that old Fin Fang Foom one.

1 minute ago, bashpics99 said:

There's also the old "White Sasquatch" from Toybiz that could be used as a stand-in, I suppose.

No tail!

Post Your Comment Now! (membership required)


MARVEL SHOPPING ONLINE


advertise here

More Reviews

More Reviews
advertise here














Entertainment News International (ENI) is the popular culture network for fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE