Marvel Legends Black Widow Movie Black Widow Figure In-Hand Images

Marvel Legends Black Widow Movie Black Widow Figure In-Hand Images


Jay Cochran - March 09, 2020
MarvelousNews reader Nighthawk sends along these in-hand images of the new Marvel Legends 6" Black Widow movie Black Widow figure from Hasbro. He found the figure at his local Walmart in Canada. The figure has the ability to store her batons on the back and is part of the Crimson Dynamo Build-A-Figure wave. Check out his images below.
Image 1 of 4
1 of 4
Image 2 of 4
2 of 4
Image 3 of 4
3 of 4
Image 4 of 4
4 of 4






Comments...

Last 10 comments - ( Read All Posts )
nighthawk - 2020-04-05 @ 1:04 am
On 3/13/2020 at 11:57 PM, Bluecomet said:

The brown jacket black widow looks like Maria hill....not really interested to get a black widow..but I can reconsider this one if I want to complete my MCU lineup

It is. I never liked the body used for Maria Hill so I made that.

 

leokearon - 2020-03-17 @ 7:53 am
11 hours ago, Gigantor said:

Just Crossbones & Spymaster for me when these hit. I'll get Winter soldier later in the yr as he is not a big priority at the moment.

Pretty much the same for me

Gigantor - 2020-03-16 @ 8:54 pm

Just Crossbones & Spymaster for me when these hit. I'll get Winter soldier later in the yr as he is not a big priority at the moment.

Bluecomet - 2020-03-14 @ 6:57 am

The brown jacket black widow looks like Maria hill....not really interested to get a black widow..but I can reconsider this one if I want to complete my MCU lineup

nighthawk - 2020-03-11 @ 5:41 pm
On 3/9/2020 at 7:15 PM, Stubs23 said:

Im wondering how hard it might be to switch the baton holder on her back to another figure? Would come in handy for a few figures I can think of

Seems attached very tight.  Might be hard to do.

Atlantis - 2020-03-10 @ 10:00 pm
On ?2?/?18?/?2020 at 8:45 AM, ADour said:

spacer.png

Yeah, the sheer amount of Crimson Dynamos and Crimson Dynamo suits there are is ridiculous. I like this BAF design since I'm not a big fan of the classic/retro Crimson Dynamo design. However, I wouldn't have minded if we got that one instead since it's more iconic. I personally would have preferred if we got modern Crimson Dynamo, since he's not too big of a departure from the retro look.

Think he's got a ways to go before he gets anywhere near the amount Stark has in his armory. Good thing is, that makes the "classic" armor appearance as a Marvel Legend, just over the horizon. Package him with a Titanium Man BAF and call it a day!

 

021_dff2ec6a-2f68-492f-9e12-73184f2542c8_large.jpg

Stubs23 - 2020-03-10 @ 2:15 am

Im wondering how hard it might be to switch the baton holder on her back to another figure? Would come in handy for a few figures I can think of

Atlantis - 2020-03-09 @ 5:46 pm
On ?2?/?17?/?2020 at 8:24 AM, EvilHayato said:

".... Dang I just want a classic version apparently. Also bummer, I was really looking forward to seeing him in the movie. Hes also not very 'crimson' in this iteration. Maroon or Brown Dynamo. 

I HATE when they do that with red! It makes no sense to me. Almost like red is too "comic-booky" or something? Who knows. I will say in this case, in the comic cover I've seen, this particular model did seem to lean more towards "brown" than anything else.

Its still ugly though.

Crimson_Dynamo_Marvel_XP.jpg

Atlantis - 2020-03-09 @ 5:24 pm
On ?2?/?17?/?2020 at 7:30 PM, EvilHayato said:

Thank you for the clarification. Yeah I saw those images when I looked up pictures of him since this new one I wasnt familiar with and the previous I originally thought to be just a kitbash or random made up design. Didnt take long by looking up pics of him to find I was wrong on both accounts. Wish we'd get a classic version of him. New one is cool and all but would love the original. Also while looking up pics of him, I realize there are ALOT of different looks for the character.  

Years ago they made a 6" Crimson Dynamo; articulation was actually pretty good, but the paint flakes a bit (on the one I have). But I hear you, we don't need to kid ourselves...we all KNOW which version we really want!

im2c_6cd1.jpg

sentinelofliberty41 - 2020-03-08 @ 11:26 am
7 hours ago, ADour said:

I'm checking prices of some recent BAFs like Super-Skrull and Demogoblin, as well as bigger-sized figures like Smart Hulk and the prices are appropriate. Limbs usually don't go for higher than 10 bucks, and some auction listings start really cheap so you just gotta be lucky. I think buying four pieces separately might not be too expensive.

Maybe buying the entire wave and selling the figures you don't want could balance costs more, but by buying the pieces separately you might save in all the hassle of selling the figures.

I guess the best thing would be to take my time and watch eBay. I think that sounds the best route for sure. Thanks for the input!

6 hours ago, Benn said:

If you can get a really good deal on the figures it might be worth it to buy them and re-sell them wihout the BAF, but it seems pretty unlikely otherwise. It largely depends on which figures, if any, are sought after. I just wouldn't assume, on average, that you can get more than $5 each re-selling them online. It costs about $8 to ship a figure to most places in the US (assuming you're in the US), so if you sell it for $5 plus the $8 shipping, it's barely a deal for the buyer without the BAF part. If you're paying $20/figure and trying to unload five at $5 each, you're basically paying $75 for the BAF, which is probably a bad deal, since $80 to $100 tends to be the price range for relatively new, highly sought-after BAFs from waves with generally less desirable figures (think Kingpin). Crimson Dynamo feels more like a $40 BAF to me, bought assembled. Maybe not initially, but for sure once the dust settles.

Honestly, the two figures you want seem likely to me to be the best sellers of the wave, and I wouldn't be surprised to see the rest of the wave hitting Walmart, Gamestop, and Amazon clearance pricing after a few months. If you can get the figures new for around $10 each, and then sell them off for $20 to $30 total, that's probably the cheapest you'll get the BAF.

I'm definitely just going to wait it out and either buy the parts I need or just get an assembled one and trade off my extras. Like you said, I'd have to come across a ludicrously cheap deal to come out on top if I sold them off. I appreciate the reply to my question. Thanks.

Post Your Comment Now! (membership required)


MARVEL SHOPPING ONLINE


advertise here

Found Hasbro Marvel Legends on Ebay




Toy Fair 2020 Live News Coverage

More Action Figures News

Advertise on Marvelous News




This site uses cookies for site configuration, advertising, and analysis. By using this site you accept our policies - Read Full Site Policy OK
Sign Up For The TNI Newsletter And Have The News Delivered To You!


Entertainment News International (ENI) is the #1 popular culture network for adult fans all around the world.
Get the scoop on all the popular comics, games, movies, toys, and more every day!

Contact and Support

Advertising | Submit News | Contact ENI | Privacy Policy

©Entertainment News International - All images, trademarks, logos, video, brands and images used on this website are registered trademarks of their respective companies and owners. All Rights Reserved. Data has been shared for news reporting purposes only. All content sourced by fans, online websites, and or other fan community sources. Entertainment News International is not responsible for reporting errors, inaccuracies, omissions, and or other liablities related to news shared here. We do our best to keep tabs on infringements. If some of your content was shared by accident. Contact us about any infringements right away - CLICK HERE